The IF1200 is a workhorse UAS designed to carry nearly any payload used in Public Safety, AEC, Cinematography, Inspection, Forestry, Water management, Waste Management, and many other applications. The IF1200 is Made in USA, and is NDAA compatible. Bluelist versions are available.

As with all our commercial and enterprise aircraft products, training is included in the cost of the aircraft.

Performance

Max Ascent Speed	5 m/s	16 ft/s
Max Descent Speed	2.5 m/s	8.2 ft/s
Max Air Speed	25 m/s	56 mph
Max Wind Resistance	12 m/s, 15 m/s gusts	23 knots, 29 knot gusts
Max Tilt Angle	30°
Max Angular Velocity	Tilt: 300°/s, Yaw: 45°/s
Operating Temperature	-20°C ~ 45°C	-4°F ~ 113°F
Operating Humidity	10% ~ 95%
Service Ceiling (with given payload)	3.9 km (12,800 ft) w/ 4kg, 2.2 km (7,200 ft) w/ 8.7 kg

Physical Features

Diagonal Size (propeller center to center)	1,025 mm	40.4 inches
Unfolded Size (flight ready, WxLxH)	165.5 x 154 x 76.5 cm	65.1 x 60.6 x 30.2 inches
Folded Size (stow, WxLxH)	47.5 x 49.5 x 47 cm	18.7 x 19.5 x 18.5 inches
Empty Weight (w/o batteries)	7.8 kg	17.2 lbs
Weight w/ Batteries	16.3 kg	35.9 lbs
Max Gross Takeoff Weight	25 kg	55 lbs
Max Payload Capacity	8.7 kg	19.1 lbs
Transport Case Size (WxLxH)	64.8 x 64.8 x 58.4 cm	25.5 x 25.5 x 23.0 inches
Transport Case Weight (w/ aircraft)	29 kg	64 lbs

Flight Stack

Flight Controller	CubePilot Cube Blue H7, Triple Redundant IMUs
GNSS / Compass	Dual CubePilot Here3 M8P
Payload Power Rails	12s Battery Voltage 5v, 12v/15v, 18v, 44.4v
Payload Interface	IF1200A Universal Payload Interface
Operating Software	Copter by Ardupilot

Flight Modes

Position Hold	Automatically holds altitude and position, manually change position
Loiter	Holds altitude and position, precision manual movements using GPS
Auto	Executes pre-defined waypoint mission
RTL	Auto returns to takeoff location and lands
Land	Auto land while maintaining horizontal position
Altitude Hold	Holds altitude only, failsafe mode if GPS signal lost

heavy lift

Inspired Flight IF1200